$0.1-2.5 /Piece/Pieces
| betaling Type: | T/T,Paypal,Others |
| Incoterm: | FOB,CIF,EXW,DDP,DDU,Express Delivery |
| Min. orde: | 50000 Piece/Pieces |
| vervoer: | Ocean,Land,Air,Express,Others |
| Haven: | SHANGHAI,QINGDAO,SHENZHEN |
Size: M1.6-M52
Material: Stainless Steel(304,316,316l,2205, 660), Carbon Steel, Aluminum, Brass,
Surface Treatment: Passivate, Zinc, Black Oxide, Powder Coating, Zinc-Nickel, Geomet, Dacromet
| Verkoopeenheden | : | Piece/Pieces |
| Pakkettype | : | Plastic zakken+dozen+pallets, of volgens de vereiste van de klant. |
| Afbeeldingsvoorbeeld | : |
|
Although the hardness of 45HRC is the starting point for hard turning, hard turning is often carried out on the workpiece with hardness above 60HRC. Materials usually include tool steel, bearing steel, carburized steel and special materials such as chrome-nickel iron alloy, corrosion resistant and heat resistant nickel base alloy stellite According to metallurgy, materials with a small hardness deviation (less than 2 HRC) over the depth of cut show the best process predictability. Parts most suitable for hard turning have a small aspect ratio (L/D). In general, the L/D ratio of unsupported workpiece is not greater than 4:1, and that of supported workpiece is not greater than 8:1 In order to maximize the rigidity of the hard turning system, the overhanging tool length should be minimized to no more than 1.5 times the height of the tool bar
Overzicht
Product Name: Precision Aluminum CNC Machining Assembly Parts
Size: M1.6-M52
Material: SS304, SS316, SS316L, SS2205, SS660, S32750 Duplex stainless steel, carbon steel, Brass, Aluminum
Standard: GB, DIN, ISO, DIN, ANSI, JIS, BS and Non-standard
Surface: Passivate, Zinc, Black Oxide, Powder coating, Zinc-Nickel, Geomet, Dacromet
Class Grade: 304,316,2205,660,4.8,8.8,10.9,12.9
Thread type: UNC, UNF, UN, UNS, UNRC
TS Hardware is an ISO9001:2015 certified company and a Master manufacturer & distributor of c ustom hardware products, which include:
CNC parts
Stamping parts
Springs
kinds of standard & non- standard fastener s:
Carbon Steel Fastene rs
Stainless Steel Fasteners
Brass Fasteners
Aluminum Fasteners
used in aircraft, military, commercial, and electronic fields.
W e also have rich experience in Steel Abrasive products
We represent a broad spectrum of the most prominent quality suppliers in China and we have over 100,000 different part numbers in stock.
If you have any needs for hardware products, please give us a chance.
| Material | 1.StainlessSteel:SS201,SS303,SS304,SS316,SS410,SS420 | |||
| 2.Steel:C45(K1045), C46(K1046),C20 | ||||
| 3.Carbon Steel: 1010,1035,1045 | ||||
| 4.Aluminum or Aluminum Alloy:Al6061,Al6063,Al7075,etc | ||||
| 5.Brass:H59,H62,Copper,Bronze | ||||
| Grade | Class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 | |||
| ASTM A193 / ASTM A193M Grade B5 (AISI 501) | ||||
| ASTM A193 / ASTM A193M Grade B6, B6X (AISI 410) | ||||
| ASTM A193 / ASTM A193M Grade B7, B7M (AISI 4140, AISI 4142, AISI 4145, AISI 4140H, AISI 4142H, AISI 4145H | ||||
| ASTM A193 / ASTM A193M Grade L7,L7M,L43 | ||||
| ASTM A193 / ASTM A193M Grade B16 | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8, B8A (AISI 304, AISI 304L, AISI 304H) | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8C, B8CA (AISI 347, AISI 347H) | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8M, B8MA, B8M2, B8M3 (AISI 316, AISI 316L, AISI 316H) | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8P, B8PA (AISI 305) | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8N, B8NA (AISI 304N) | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8MN, B8MNA (AISI 316N) | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8MLCuN, B8MLCuNA | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8T, B8TA (AISI 321, AISI 321H) | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8A, B8RA | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8S, B8SA | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8LN, B8LNA (AISI 304N, AISI 304LN) | ||||
| ASTM A193 /A193M, ASTM A320 /A320M Grade B8MLN, B8MLNA (AISI 316N, AISI 316LN) | ||||
| Finish | Plain, Zinc Plated(Clear/Blue/Yellow/Black), Black oxide, Nickel, Chrome, H.D.G and etc. | |||
| Thread | UNC,UNF,UEF,UN,UNS | |||
| Standard | ISO, GB, BS, DIN, ANSI,JIS, Non-standard | |||
| Sample Service | Samples are all in free. | |||
| Certificate | ISO9001,CE | |||
| Advantage | 1. Competitive price; 2. OEM service available | |||
| Packing | Bulk in cartons (25kg Max.)+wood Pallet or according to customer special demand | |||
| Delivery method | by sea, by air or by express service | |||
| Application | Structural Steel; Metal Building; Oil&Gas; Tower&Pole; Wind Energy; Mechanical Machine; Automobile: Home Decorating and etc. | |||
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now